OP Container

/OP Container

OP Container

Body in AlMg3 light alloy sheet, anodized (10 micron).
2 hinged perforated shelves. Shelves can be folded toward the front. 2 possible internal configurations of shelves:
-loading and transport of sterile linen
-loading and transport of dirty linen inside bags
Lid and bottom slanting toward the front to avoid water retention. Silicon seal on bottom. Double wing door built with 2,5 mm bent sheet and welded reinforcements on top and bottom, opening at 270┬░ with stopping magnet for resting position. Door fastening by one vertical thumb-latch hooking on top and bottom. The truck is equipped with an EPDM gasket on top and on bottom to grant protection of contents from water and dust.
One push-handle on each short side. Black board 450×200 mm and A4 card-holder on a short side (fixed wheels). Strong non-twisting bottom iron frame with epoxy finishing (80 micron). Non-marking grey rubber buffer on bottom and on top. 2 fixed and 2 swivelling wheels dia. 125 mm with non-marking rubber ring, ball bearing and zinc-plated housings.

Shelf carrying capacity: 60 kg/each
Bottom carrying capacity: 80 kg

Light between shelves:
lower space 412 mm
middle space 413 mm
upper space 517 mm

OP Container
ModelDescriptionInternal dimensions External dimensionsCapacityWeightWheels diameter Wheels positionCarrying capacityColour MaterialContainersVertical section
RH1550ON161Cupboard truck with hinged shelves865 x 465 x 1405 mm h965 x 545 x 1690 mm h565 l53 kg125 mm